1. technical data
measuring range:0.5-18m resolution:0.01m tolerance:1%
resolution for temperature measuring: 0.1, tolerance of temp measuring:+/-1
lower voltage sign will appear when the battery voltage is lower than 7v.
working voltage: 9v
wavelength of the laser: 650nm output power <1mw laser class ii
size of the product:145*65*35mm
auto power off: if no any button is operated within 60 seconds, the product will power off automatically. it will stand by if you push “read” button again. the laser point is helping for positioning, which makes the measurement more accurate.
2. distance measuring
remarks: all the measured length starts from the bottom of the product. (that is, all the measured length includes the length of the product itself.)
press “mode” button to measure the length. the sign “l” will flash on the screen. press “read” button, point the laser dot vertically to the position that you want to make the measurement, you will get the number on screen. if you press the “read” button more than 2 seconds, the product will start the continuous measuring mode. the measurement will be done twice per second.
3. under the mode of length measuring, press +/= will start the accumulating mode. the “+” sign will appear on the screen. press read button to get the first measurement, which will show on the screen. press read again to get the second. screen will show the sum of these two measurements. and the further measurements will be accumulated to the previous result.
4. measurement of area.
press “mode” for shifting to area measuring. the sign “xx” will appear on the screen. then the length sign “l” will flash to remind you of length measuring. press “read” to get the length on screen. the width sign “w” will flash then. press “read” to get the measurement of width. the screen shows the result of the measured area. press “read” again for new measurement.
5. measurement of volume
press “mode” for shifting to volume measuring. the sign “xx” will appear on the screen. then the length sign “l” will flash to remind you of length measuring. press “read” to get the length on screen. the width sign “w” will flash then. press “read” to get the measurement of width. the screen shows the result of the measured area. the height sign “h” follows to remind you of the measurement of height. press “read” to get the height and the screen shows the volume. press “read” and repeat above steps for new measurement.
6. unit shifting
press “unit” for shifting among metric, inch and yard.
7. temperature measuring
press “mode” shifting to temperature measuring. it shows the current environment temperature. if you press “unit” at this time, you will shift between fahrenheit and celsius system.
8. store and recall
under the mode of length measuring, press “mode” and “+/=” at the same time to store the currently measured data. “m” will show on the screen. press “mode” and “+/=” again together to cancel the storage.
under the mode of length measuring, when “m” is displayed, press “mode” and “unit” button together to recall the stored data
9. caution
1) the measuring accuracy may vary when the environmental temperature and moisture change. the product has the auto-compensation function for temperature. in order to secure the measuring accuracy, please wait until the temperature of the product is in accordance with the environment. otherwise, there may be a big tolerance.
2) during the measurement, you must keep the product vertical to the measured surface. no obstacle is allowed in between so that the result will be accurate enough.
其他测距仪系列
余姚市琦琦光电仪器厂是一家集仪器开发、设计、生产、加工于一体的高科技精密光电仪器制造厂。专业生产激光标线仪、三脚架、激光水平尺、水准仪等，并能根据客户要求研发生产各类产品。其产品广泛应用于国际工业、工程测量、建筑装潢等多种领域。产品精湛可靠，全面通过iso9001质量体系的管理认证，并以雄厚的实力、优质的产品、合理的价格、完善的服务为海内外客户提供诚挚、长远的合作。
工厂坐落于余姚市斗门开发区，环境优美，交通便捷。货物吞吐方便，距杭甬高速8公里，宁波机场50公里，宁波港50公里，杭州机场90公里，上海机场150公里，上海港170公里。
我们相信在“合作共赢，和谐发展”的基础上，一定能与海内外客商携手共创美好的未来。
余姚市琦琦光电仪器厂（普通合伙）
金永义
13957469573
余姚市余姚市马渚镇斗门余马北路1号
